Single point table top load cell, single point load cell, table top load cell, bagging machine, check weighers, bench,counting & postal scales

Home | Sitemap | E-mail us

	Digital Load Cell NEW

	Single Point Platform Load Cell

	Single Point Table Top Load Cell

	Single Point Miniature Load Cell

	S Beam Load Cell

	Double Ended Shear Beam Load Cell

	Single Ended Beam Load Cell

	Compression Load Cell

Single – Point Platform Load Cell

Other Model :

Model SS-710

Model SS-510

Model SS - 510

Model Information | Dimension | Photograph

Model Information :

FEATURES:
o Single point Capability with minimum off- Centre error
o Low Profile Bending Beam Load Cell Design
o Support the platform size of 400x400mm
o Moisture Proof sealing harsh Environment

APPLICATIONS:
o Check Weighers
o Bagging Machine
o Bench, Counting & Postal Scales

DESCRIPTION:
Model 11510 is a strain gauge based low profile bending beam load cell and is ideal for Bench, Counting ,Floor,Postal and Retail Scales. It is designed for eccentric load sensitivity. It is Constructed from Anodised Aluminium Alloy.

PERFORMANCE SPECIFICATION
Standard capacity(Kgf.)	60,75 & 100
Excitation Voltage	10VDC- Maximum 15VDC
Nominal Output	2.0 mV/V
Non Linearity	<± 0.025%FSO(Full Scale Output)
Hysteresis	<± 0.02%FSO
Non Repeatability	<± 0.01%FSO
Creep(30 Minutes)	<± 0.03%Fso
Zero Balance	± 5.0%FSO
Input Resistance	420 ± 15 Ohms
Output Resistance	350 ± 3 Ohms
Insulation Resistance	>1000Mega Ohms at 50VDC
Safe Overload	150%of Rated Capacity
Ultimate Overload	250%of Rated Capacity
Temperature	0-60°c
Compensated Range
Temperature Effect on Output	<0.0015%FSO/°C
Temperature Effect on Zero	<0.0020%FSO/°C
Platter Size	400mm x 400mm
Eccentric Load Effect	<0.02% of FSO at 1/3 rated load placed at the edge of the Specified size platter
Deflection	<0.5mm at FSO
Tightening Torque	2 m.Kg.
Finish & Construction	Anodised Aluminium Alloy
Environment Protection Class	IP65

Developed by: Krish Inc.